ProMounts UAPRO210 TV Mount User Manual


  Open as PDF
of 5
 
5
UA-PRO210INSTALLATION (3)
Step 5:
Cable Management:
5.1 To install the cable, rst you
need to remove the end cover (I)
and slide the cable cover (J) out
from the arm.
5.2 Do the same for the rest of the
cable covers before installing the
cables.
5.3 Install the cables and slide the
covers back to the arm.
5.4 Install the end covers.
Step 6:
Adjusting the Display:
6.1 Slight loosen Bolt (A); do not
loosen fully or remove it, otherwise
injury may occur.
6.2 Grasp the upper and lower
edge of the Display, and then push
or pull the Display to the
desired tilt angle.
6.3 Tighten Bolt (A).
6.4 If necessary, adjust horizon
with bolts (H), as in step 4.5.
5
6
I
J
A
B
H
A
B
FOR MORE INFORMATION VISIT
www.promounts.com
ProMounts
TM
name, logo and model numbers are property of ProMounts.
© ProMounts
TM
2010
 previous