Filter
Top Products
ON-SCREEN DISPLAY FUNCTION
Pressing the DISPLAY button during
playback to display the contents of the
current disc on the screen.
Example, how to display the contents of
the curreny disc.
FOR DVD:
(1) Press DISPLAY for the first time:
Title Number, Total Title Number, Chapter
Number, Total Chapter Number of this
Title of the disc currently being played
will be shown on the screen, along with
the elapsed time.
(2) Press DISPLAY for the second time:
(3) Press DISPLAY for the third time:
(4) Press DISPLAY for the fourth time:
(5) Press DISPLAY for the fifth time:
The message on the screen will be cleared.
FOR VCD:
(1) Press DISPLAY for the first time:
TITLE 01/03 CHAPTER 002/025
00:02:25
CHAPTER REMAIN
00:01:39
CHAPTER ELAPSED
00:00:24
TITLE REMAIN
01:46:58
SINGLE ELAPSED
00:25 01/13
OPERATION
“SHUFFLE ON” on the screen. Then
press
button to start SHUFFLE
playback. Press SHF button or
SHUFFLE button again in stop mode,
“SHUFFLE OFF” appears and release
the mode.
PREVIEWING PLAYING (ONLY FOR
VCD/CD/MP3)
Press SCN button on the front panel to
play first several seconds of each track
on the current disc. Press again to stop
intro and listen to track.
PLAYING IN PROGRAMMED ORDER
For CD/VCD (WITH PBC OFF):
Press the stop button twice to ensure
that the player is in STOP mode. Then
press PROGRAM button, the screen will
display “PROGRAM P00:00”. For
example: press numeric button 4,
“PROGRAM P01:04” appears, it means
track 4 will be played first, then press
numeric button 6 and “PROGRAM
P02:06” appears. Press the different
numeric button to select the
corresponding track, and then press OK
button to confirm. If there isn’t any
operation, it will confirm the inputs
automatically after five seconds. Then
press
button or OK button to exit
program mode and play tracks in
programmed order.
When playing in programmed order,
press stop button twice, then press
PROGRAM button, and then press OK
button, it will play in normal order.
For MP3:
In stop mode, press PROGRAM button,
the screen will display “PROGRAM
P00:0000” and the program method is
the same as described above. If you
want to complete program setting, press
(Stop) button first then press button
to play tracks in programmed order. In
stop mode press
PROGRAM button to
exit program mode and “PROGRAM
OFF” appears. If you set WITH MENU in
SMART NAV item in PREFERENCES
PAGE, you can use
/ , / buttons to
select PROGRAM PXXX mode or track
number and press OK button to confirm
it.
19