Filter
Top Products
10
REMOTE CONTROL
Preparing the Remote Control
Inserting the Batteries
1. Open the battery compartment cover.
2. Insert the new batteries. Make sure
that the positive and negative
terminals of the batteries are oriented
indicated.
3. Close the cover
Battery: Two AAA size battery.
Using the Remote Control
Face the remote control towards the
player front face IR mark (remote control
signal receiver).
Operation angle: About ± 30 degree in
each the direction of the front of the IR
mark.
To prevent damage to the unit, be sure
to follow the connection diagram
(page 7).
Loading a DVD/VCD/CD Disc
1. Turn the ignition on to the accessory
position and the STAND BY indicator
(1) will display red.
2. Press the POWER button (2). The
STAND BY indicator will go out.
3. Press
button on the front panel (3)
or on the remote control to open the
disc loading tray (4), then place the
disc with printed side facing up on the
tray.
4. Close the tray by pressing
button on
the front panel or on the remote
control, and the player will start
playback automatically.
Ejecting a Disc
Open the disc loading tray by pressing
button on the front panel or on the
remote control, and then the disc will
stop playing automatically. Then you can
remove the disc and close the tray.
4 213