Filter
Top Products
12
MENU
OSD ON
AUTO PLAY ON
AUTO REPEAT ON
RECORD SPEED EP
VCR OUTPUT CH CH3
INPUT SIGNAL TV
SHIFT: SEL: END:MENU
Setting the Record Speed
1. Press MENU key on the remote control.
2. Press shift key, until the cursor is placed in front of the
"RECORD SPEED" option.
3. Press select key until the appropriate system is selected.
("EP" or "SP")
3. On completion, press MENU key to exit the menu.
MENU
OSD ON
AUTO PLAY ON
AUTO REPEAT ON
RECORD SPEED EP
VCR OUTPUT CH CH3
INPUT SIGNAL TV
SHIFT: SEL: END:MENU
Setting the VCR Output CH
1. Press MENU key on the remote control.
2. Press shift key, until the cursor is placed in front of the
"VCR OUTPUT CH" option.
3. Press select key until the appropriate system is selected.
("CH3" or "CH4")
3. On completion, press MENU key to exit the menu.
MENU
OSD ON
AUTO PLAY ON
AUTO REPEAT ON
RECORD SPEED EP
VCR OUTPUT CH CH3
INPUT SIGNAL TV
SHIFT: SEL: END:MENU
Setting the Input Signal (Entrance to TV Tuner Operation)
1. Press MENU key on the remote control.
2. Press shift key, until the cursor is placed in front of the
"INPUT SIGNAL" option.
3. Press select key, then the current input signal mode will be blinked.
4. Press shift key until the appropriate system is selected.
("TV" "CATV" "AV1" "AV2" )
5. Press select key, to keep selected input signal.
Note :
AV1 - Rear A/V Input
AV2 - Front A/V Input
If " TV" or "CATV" is selected, channels will be found and stored automatically.