Filter
Top Products
1. Press MENU key on the remote control.
2. Press shift key, until the cursor is placed in front of the "INPUT SIGNAL" option.
3. Press select key, then the current input signal mode will be blinked.
4. Press shift key, until "CATV" is selected.("TV" "CATV" "AV1" "AV2)
5. Press select key, then channels will be found and stored automatically.
While the "AUTO SEARCHING " is progressing, channels will be changed up to 125.
6. When searching and storing is completed, the CATV mode will be displayed.
13
MENU
OSD ON
AUTO PLAY ON
AUTO REPEAT ON
RECORD SPEED EP
VCR OUTPUT CH CH3
INPUT SIGNAL TV
SHIFT: SEL: END:MENU
AUTO
SEARCHING..........
CH***
MENU
SHIFT: SEL: END:MENU
TV CHANNEL SET
CATV CHANNEL SET
OSD ON
AUTO PLAY ON
AUTO REPEAT ON
RECORD SPEED EP
VCR OUTPUT CH CH3
INPUT SIGNAL CATV
AUTO
SEARCHING..........
CH***
1. Press MENU key on the remote control.
2. Press shift key, until the cursor is placed in front of the "INPUT SIGNAL" option.
3. Press select key, then the current input signal mode will be blinked.
4. Press shift key, until "TV" is selected.("TV" "CATV" "AV1" "AV2)
5. Press select key, then channels will be found and stored automatically.
While the "AUTO SEARCHING " is progressing, channels will be changed up to 69.
6. When searching and storing is completed, the TV mode will be displayed.
NOTE :
While searching and storing channels, no button will be operated.
When "AUTO REPAT" function is "OFF" and VCR is "STOP" mode, this function will be operated.
NOTE :
While searching and storing channels, no button will be operated.
When "AUTO REPAT" function is "OFF" and VCR is "STOP" mode, this function will be operated.
If RF-Signal is not input searching channel will be displayed blue-back picture.
If RF-Signal is not input searching channel will be displayed blue-back picture.
OPERATING TV TUNER