PYLE Audio PM725 Universal Remote User Manual


 
98
Advanced Button Functions
DVD
Scan+ and Scan- buttons control the speed of Fast
Forward and Reverse Playback respectively.
Chapter+ and Chapter- buttons respectively locate the
succeeding or preceding Chapters or Tracks on a disc.
Subtitle button brings up DVD Subtitle Menu for
Subtitle selection and display.
Repeat button performs DVD players “A-B Repeat” (or
RPT A.B) function for repeat play of current Chapter or
Track.
Info/Select button brings up DVD Display or Control
Menu for Chapter/Track/Title number, Time remaining/
elapsed indication, system information, etc.
Menu brings up the DVD disc Menu screen - use with
the Up, Down, Left & Right navigation buttons.
OK button is used for on-screen Menu selection. Note
some DVD players require the Play button to be used.
Quit button is used to Exit or Clear on-screen Menu
displays.
Play button is used to start Disc playback and for Menu
selection on some DVD players.
Stop button stops Disc playback.
Pause button will pause Disc playback - press Play to
resume.
Note - in DVD Mode the INPUT button activates the
DVD Players SETUP Menu.
SAT
Guide button displays on-screen Satellite Channel
Guide.
Chapter+ and Chapter- buttons perform the “Page+”
and “Page-” function for on-screen Guide Menus used
by some Satellite systems.
Info/Select button brings up Satellite Display screen for
current Channel and system information.
Menu brings up the Satellite Menu screen - use with the
Up, Down, Left & Right navigation buttons.
OK button is used for on-screen Menu selection.
Quit button is used to Exit or Clear on-screen Menu
displays.
Input button performs the Satellite TV/SAT function.
TV/VCR Punch-Through
VCR Punch-through is automatically available in TV and
Cable Modes only i.e. the 6 VCR keys (Play, Pause, Stop,
Record, FF and Rewind) will punch-through to the
device programmed under VCR when in either TV or
Cable Modes.
The TV/VCR/INPUT button performs the TV/VCR
antenna switch function when in VCR Mode.
The TV/VCR/INPUT button performs the A.B switch
function when in Cable Mode.
The TV/VCR/INPUT button performs the TV/SAT
switch function when in SAT Mode.
The TV/VCR/INPUT button performs the INPUT source
switch function when in TV Mode.
The TV/VCR/INPUT button performs the DVD Setup
function when in DVD Mode.
The TV/VCR/INPUT button performs nonspecific
functions when in CD/Audio Mode.
Misc.
SELECT means same as OKAY - some manufacturers
use OKAY label and others use SELECT label on their
remotes.
CC will activate the Closed Caption feature if your
device has that feature.
PIP (Picture-in-Picture) and TOGGLE buttons operate
your television’s Picture-in-Picture features. Use PIP to
activate the feature and TOGGLE to swap between the
displayed pictures on your TV.
TV/VCR and TV/DVD Combo units
Note that for some TV/VCR and TV/DVD combo units
you might need to set up two different buttons to
control both parts of the combo unit. E.G., (referring to
the Direct Code Entry section on the following page)
you might need to set up a code under the TV button to
control the TV part of the combo unit AND a separate
code for the VCR or DVD under any other button you
choose.