Filter
Top Products
-6-
-3-
Part 1a-Wood Stud Mounting
.
Usewallplate(1)asatemplate,makesureitislevel,andmarkfourmounting
holes along the center lines of the wood studs. Drill four 3/16
)) . .
”
”
(5mm)dia
holes 2 (50mm) deep. Level wall plate(1) and attach to wall with four long
bolts(G and four washers(I . Tighten screws firmly Donot overtighten
Part 1a-Wood Stud Mounting
Part 3-Mounting the flat panel screen
NOTE:
Hook the top of brackets onto the top flange
of wall plate(1). Then swing the screen down.
(2,3)
Always use an assistant or mechanical
lifting equipment to safely lift and position
heavy equipment.
Part 3-Mounting the flat panel screen
NOTE:
Use theLocking bar(4)to prevent theTV from being removedor
accidentally knocked off ofthe wallplate.When the lockingbar half
insertes intothe wallplate , you canuse therotating rod(5) tomakeit
fully inserted.
Stud finder
2 (50mm)”
Φ3/16 (5mm)”
5
4
Wood stud
G
I
2,3
1