Filter
Top Products
-4-
-5-
Part 1b-Concrete Wall Mounting
.
Level wall plate(1) and use wall as a template to mark four holes. Drill four 3/8
(10mm) dia. holes 2 (50mm) deep. Insert four anchors(H) into holes and
secure wall plate with four long bolts(G) and four washers(I).Tighten screws
firmly. Do not overtighten
”
”
Part 1b-Concrete Wall Mounting
2(” 50mm)
Φ3/8 (10mm)”
Square washer(F)
Smallhole for
M4screws
Mediumhole for
M5andM6screws
Large holefor
M8screws
.
Part 2a-Attaching Brackets To Screen With Flat Back
Center brackets vertically on back of screen. Select the small(A or B),
medium(C or D) or large(E) screws. Attach brackets to screen using four
selected screws and four square washers(F) at the top and bottom of each
bracket. Tighten screws firmly. Do not overtighten
Part 2a-Attaching Brackets To Screen With FlatBack
F
A-E
Concrete Wall
G
I
H