Q-Logic 59238-02 A TV Video Accessories User Manual


  Open as PDF
of 4
 
Installation Guide HyperStack Cable 9000 Series Stackable Chassis Switch
59238-02 A 3
Install HyperStack Licenses
Follow the directions on the License Key
Upgrade document for each switch. Apply the
respective license keys to each switch using the
Feature Add command.
Switch #> admin start
Switch (admin) #> feature add #-XXXXXXXXXXXXX
License upgradefor HyperStack(tm) capability.
This feature upgrade does NOT require a switch reset.
Do you want to continue with license upgrade
procedure? (y/n): [n] y
Log Msg: [day mon date hh:mm:ss.sss CST
year][C][8400.006B][Switch][Upgrading License for
HyperStack(tm)capability]
Log Msg: [day mon date hh:mm:ss.sss CST
year][C][8400.0047][Switch][New licenses are being
installed]
Connect the HyperStack
Cables
Use a screwdriver to remove the covers from all
ICC ports.
Connect a HyperStack cable to one of the ICC
ports with the label side up as shown.
Secure the cable connector with the captive
screws.
1. ICC Port Cover 2. Label facing up
Complete the HyperStack
Cable Connections
Connect the remaining HyperStack cable
connectors as shown in the illustration. These
copper cables are very flexible and can be bent
as needed without damage.
NOTE:
This is the only cabling configuration that is
supported. Any other configuration will result in
an error.
1
2
 previous