Filter
Top Products
8
You can assign any device key to work with
any available device. For example, if you want
to use AUD to control a second TV, simply
follow the same steps listed in “Programming
a Device” using the codes listed in
“Manufacturers Codes” for your TV.
Searching for a Code
If your device does not respond to the remote
after trying all codes listed for your brand or if
your brand is not listed, try searching for your
code.
Use the following device code digits to control
a specic device:
Code Digit Device
0 Cable / Satellite
1 TV
2 DVD, VCR, DVR/PVR
3 Audio, Misc Audio
1. Turn on your device and, if needed, load
media (for example, a DVD).
2. On the remote control, press a device key
(TV, CBL/SAT, DVD, VCR or AUD) once;
it blinks once. Then press and hold P until
the LED blinks twice.
3. Enter 9 9 1. The LED blinks twice.
4. Press the code digit for your device. The
device key blinks twice. Aim the remote
control at the device and press Power
once.
5. Press and release the CH+ key
continuously, then stop when the device
turns off.
The remote is sending IR codes from its
extensive library to the selected device,
starting with the most popular code
rst.
6. Press Power. The device should turn on,
then press P to lock in the code.
If the device does not turn on during step
6, slowly press and release CH- to go back
through the codes, press and release P when
the device turns on.