Filter
Top Products
26 Code Verification
6-IN
-ONE
CODE VERIFICATION
If you have set up your remote via the Search
Method, you can “blink”back your code for future
reference. Please notice that the bottom part of
the IR Indicator will indicate the 4 digits by blink-
ing the number of times to represent each digit.
T
O BLINK BACK YOUR TELEVISION CODE
:
1. Press TV on your remote.
2. Hold down P for at least 3 seconds.The bottom
of the IR Indicator blinks twice, and a circle
appears around P.
3. Press 9 9 0.The bottom part of the IR Indicator
blinks twice.
4. For the first digit of your four-digit code, press
1 and count the number of times the animated
IR Indicator blinks. If it does not blink,the digit
is “0”.
5. For the second digit,press 2 and count the animat-
ed blinks.If it does not blink, the digit is “0”.
6. For the third digit,press 3 and count the animated
blinks. If it does not blink,the digit is “0”.
7. For the fourth digit, press 4 and count the animat-
ed blinks.If it does not blink, the digit is “0”.
• TO BLINK BACK THE CODE FOR YOUR OTHER DEVICES FOLLOW THE
INSTRUCTIONS ABOVE
, BEING SURE TO PRESS THE APPROPRIATE DEVICE
KEY DURING STEP 1.
• IFYOU PRESS ANY DIGIT BESIDES 1 AFTER PRESSING 9 9 0,THE REMOTE
EXITS SET UP MODE
.IFYOU DO NOT PRESS A KEY FOR 30 SECONDS,THE
REMOTE WILL EXIT THE SET UP MODE
.
QUICK CODE REFERENCE
Write down the codes for your devices in the
boxes below for quick and easy reference.
Device type Code
VCR
CBL/SAT
TV
CD
DVD
AUDIO
RadioShack_Kameleon_v3b.qxd 4/10/03 3:22 PM Page 26