Filter
Top Products
40
• To display the remaining recording time,
press
DISP/ENT
during a timed recording.
• To temporarily stop the tape during a
recording, press
PAUSE
. Press
PAUSE
again to resume recording. If you leave
the VCR paused for about 5 minutes,
the VCR automatically stops.
• If the cassette’s erase protection tab has
been removed, the VCR ejects the cas-
sette and
CHECK
CASSETTE
RECORD
TAB
appears. Use another cassette, or
place a piece of heavy plastic tape over
the erase-protection tab hole.
10. Press
STOP
to stop recording at any time
before it automatically stops.
Recording One Program on the VCR
While You Watch Another on the TV
1. Follow Steps 1
–
9 of “Recording a Program
as You Watch It” on Page 39.
2. Repeatedly press
TV/VCR
until VCR disap-
pears.
Note:
If you are watching the program on a
TV/monitor that is connected to the VCR’s
R-AUDIO-L/VIDEO OUT
jacks, set the TV/
monitor to its TV mode.
3. Set the TV tuner to the channel you want to
watch.
4. Press
STOP
to stop recording at any time
before it automatically stops.
RECORDING WITH VCR PLUS+
The VCR’s VCR Plus+ Easy Taping feature
lets you easily record TV programs by using
the PlusCodes shown in most TV program list-
ings.
Setting the VCR Plus+ Guide
Channels
Most television guides contain a list of two-digit
numbers called guide channels or VCR Plus+
channel numbers. Each broadcast/cable TV
channel is assigned one of these numbers.
Notes:
• Before you can record using VCR Plus+,
you must first set the VCR’s guide chan-
nels so your VCR can recognize the Plus-
Codes published in your television guide.
• You can find a guide channel listing for
your area in the TV section of most Sunday
newspapers and other TV listings. In some
listings, the guide channel numbers are
listed next to the station’s call letters.
• You only need to set the VCR Plus+ guide
channels once. The channels stay in mem-
ory even if the VCR’s power is interrupted
for an extended period of time.
• Before you start, be sure you have com-
pleted all connections, set the clock, set
the on-screen programming language,
selected the input signal, and programmed
all the channels available in your area.
Follow these steps to set the guide channels.
1. Using the list of guide channels in your
television guide as a reference, write down
the following information about each sta-
tion in your area:
• Station name/call letters
• Guide channel number for the station
• Channel number you select on the TV,
cable box, or VCR to tune the station
16-635.fm Page 40 Wednesday, July 21, 1999 9:03 AM