Filter
Top Products
13
Preparation
Follow these steps to program the power key.
1. Turn off all devices.
2. Hold down
P
until the red light blinks twice.
3. Press
9 9 5
. The red light blinks twice.
4. Press
POWER
.
5. Press the device keys
TV
,
VCR
,
CBL/SAT
,
DVD
,
CD
or
AUX
) in the desired order.
6. Hold down
P
until the red light blinks twice.
Resetting the Power Key
Follow these steps to reset the Power key to the de-
fault settings (delete the master power setup):
1. Hold down
P
until red light blinks twice.
2. Press
9 9 5
. The red light blinks twice.
3. Press
POWER
.
4. Hold down
P
until red light blinks twice.
REASSIGNING DEVICES
Although your remote is designed to control a TV, a
VCR, a cable converter (or SAT receiver), a DVD play-
er, a CD player, and an auxiliary device, you can reas-
sign an unused device key (for example,
AUX
) to
control another device, such as a second VCR.
1. Hold down
P
until the red light blinks twice.
2. Press
9 9 2
. The red light blinks twice.
3. Press the device key for the device you are add-
ing (for example,
VCR
) then press the device key
for the unused key where the additional device
will be assigned (for example,
AUX
). The red light
blinks twice.
4. Set up the reassigned key to control your device
(see “Setting Up Your Remote” on Page 9).