Filter
Top Products
20
Operation
Note:
If your device has a built-in sleep function,
pressing
SLEEP
activates the device’s sleep
timer.
3. Press
SLEEP
again within 10 seconds to add
another 15 minutes. Repeat as desired up to a
maximum of 60 minutes.
4. Place the 6-In-One Remote directly in front of the
device you chose to enter sleep mode.
To deactivate the Sleep Timer, press any key. The red
light stops blinking.
Locking/Unlocking the Sleep Timer
The 6-in-One Remote’s built-in sleep function can be
enabled even if another device has a sleep timer. Sim-
ply lock the Sleep Timer to ensure it functions.
1. Select
TV
or
CBL/SAT
.
2. Hold down
P
until the red light blinks twice.
3. Press
9 7 0
. The red light blinks twice.
4. The red light blinks twice when the Sleep Timer is
locked. (If you are unlocking the Sleep Timer, the
red light blinks four times.)
USING HOME THEATER
The 6-In-One Remote’s Home Theater feature allows
you to access the most-used functions of all your dif-
ferent components without changing device modes.
For example, you can play your DVD player, control
the volume on your TV, change channels on your ca-
ble box, and control the menu on the cable all in the
same device mode — Home Theater mode.
Important:
The features you can combine are orga-
nized into four Function Groups. Each function group
can only be assigned to a device in the device group
of the corresponding number (Function Group 1 can
only be assigned to a device in Device Group 1, Func-
tion Group 2 can only be assigned to a device in De-
vice Group 2, and so on).