Filter
Top Products
4
• Use extreme care when controlling potentially dan-
gerous products as part of your Plug ’N Power sys-
tem. Use a separate unit code exclusively for such
appliances.
• If you want to control fluorescent, mercury vapor,
sodium, or low voltage lights, see your local
RadioShack store for assistance.
• Do not use Lamp Dimmer Modules to control light fix-
tures that have built-in dimmers.
• Do not use Wall Switch or 3-Way Switch Modules to
replace switches that control wall outlets or non-
lighting devices.
• The Wall Switch and Outlet Modules require direct
connection to your house wiring. If you are not famil-
iar with typical house wiring installation, we suggest
that you have these types of modules professionally
installed. In any case, be sure that the electricity is
turned off at the circuit breaker or fuse panel while
you are installing one of these modules.
• Low-voltage electricity flows through the circuit con-
trolled by a Wall Switch Module even when the switch
is off. This is necessary for proper operation of the
Wall Switch Module. You can completely turn off the
electricity by sliding the switch's disable slide switch
to off.
61-2576.fm Page 4 Wednesday, September 8, 1999 1:50 PM