Filter
Top Products
8
Unit Code
Each Wireless Remote Control Center
can operate up to 16 different modules or
groups of modules. Every module has a
unit code dial with settings from 1 through
16. You can set the control center to con-
trol any module or group of modules set
to the same house code.
The unit code dial on the control center sets the code for
the outlet on the control center. It can be set to respond
to unit codes 1 through 16. However, the remote control
can be set to control modules 1–8 or 9–16 by setting its
slide switch accordingly. The control center will respond
to all 16 unit codes and retransmit them to the Plug ’N
Power modules.
1
3
5
7
9
11
13
15
61-2576.fm Page 8 Wednesday, September 8, 1999 1:50 PM