RCA 24F502TDV TV VCR Combo User Manual


 
31
STEREO
STEREO SAP
SAP
Stereo recording and playback / Second Audio Program (SAP)
When an MTS STEREO broadcast is
received, the word STEREO will
appear on the screen and the program
can be viewed or recorded in stereo.
The Hi-Fi STEREO recording proce-
dure is the same as for normal record-
ings.
NOTE:
When using a Cable TV system, stereo TV programs may be
transmitted over a mono cable channel. In this case the word
“STEREO” will not appear and the sound will be in mono.
Output selection
When viewing an MTS STEREO TV program, or playing a prere-
corded VHS Hi-Fi STEREO video tape, press AUDIO SELECT to
select how the audio will be heard through the speakers. Normally
set to the Hi-Fi STEREO position, this button can be set to the
MONO position if the stereo broadcast or videotape audio is of
poor quality. The “R” and “L” positions allow the audio from the
Right or Left Hi-Fi channel to be heard over both TV speakers.
This button has no effect when viewing a MONO video tape or TV
program. Each time when you press the button, OUTPUT SELEC-
TION display appears on the screen for several seconds. Refer to
the chart below.
Second Audio Program (SAP)
Your TV/VCR/DVD is fitted with a SAP broadcast system which
enables you to switch to a second audio program when
viewing a selected channel.
This function applies only when the program is broadcast in
multi-languages through the SAP broadcast system.
1
Press SETUP/TV MENU in the TV/VCR mode. Then press
or to select option.
2
Press or to select “SAP”.
Then press
to select “ON”.
Then press SETUP/TV MENU
until the menu screen is cleared.
Listening to SAP
When the TV/VCR/DVD is turned on or a channel selection is
made, make certain the letters “SAP” appear on the screen. This
means that the “Second Audio Program” broadcasting is available.
NOTES:
When playing back a tape that is not
recorded in Hi-Fi stereo mode, the
audio will automatically be monaural.
When listening to a VHS Hi-Fi video
tape or MTS broadcast through the
VHF/UHF jack (Audio/Video cord not
connected), the sound will be monau-
ral.
Stereo recording and
playback
The VHS Hi-Fi audio system permits
high fidelity recording of MTS
STEREO TV broadcasts.
OUTPUT
SELECTION
STEREO
L ch
R ch
MONO
SOUND HEARD ON BOTH
SPEAKERS
STEREO
LEFT CHANNEL AUDIO
RIGHT CHANNEL AUDIO
MONO
OR
CH
5V40101C [E] P30-35 15`03`06, 11:0031