Filter
Top Products
18
3.5.12.1 Press ”
Up
” or “
Down
” to choose CLEAR HDD setup.
3.5.12.2 Press ”
ENTER
” to confirm CLEAR HDD setup.
3.5.12.3 Press ”
Up
” or “
Down
” to choose CLEAR HDD setup YES or NO.
YES: Confirm to clear HDD, and screen will show followings.
ALL DATA IN HDD
WILL BE CLEARED
ARE YOU SURE?
(◄ : NO ► : YES )
Press“ ►” to clear HDD
NO: Confirm not to clear HDD.
3.5.12.4 Press ”
MENU
” to exit and confirm current operation.
3.5.12.5 Press ”
MENU
” again to exit and close
SYSTEM
setup mode.
3.5.13 SYSTEM RESET setup
This device allows user to reset the system.
3.5.13.1 Press ”
Up
” or “
Down
” to choose SYSTEM RESET setup.
3.5.13.2 Press ”
ENTER
” to confirm SYSTEM RESET setup.
3.5.13.3 Press ” ”
Up
” or “
Down
” to choose SYSTEM RESET Yes or No
YES: To confirm System Reset (load default system reset)
NO: Confirm not to System Reset
3.5.13.4 Press ”
MENU
” to exit and confirm current operation.
3.5.13.5 Press ”
MENU
” again to exit and close
SYSTEM
setup mode.
3.5.14 REMOTE MODE setup
This device allows user to set the remote mode.
3.5.14.1 Press ”
Up
” or “
Down
” to choose REMOTE MODE setup
3.5.14.2 Press ”
ENTER
” to confirm REMOTE MODE setup
3.5.14.3 Press ”
Up
” or “
Down
” to choose Interface for REMOTE MODE setup
RS-232: Use RS-232 interface
RS-485: Use RS-485 interface
3.5.14.4 Press ”
MENU
” to exit and confirm current operation.
3.5.14.5 Press ”
MENU
” again to exit and close
SYSTEM
setup mode.
3.5.15 Remote protocol Transmitting Baud Rate setup
This device allows user to set the remote protocol transmitting baud rate.
3.5.15.1 Press ”
Up
” or “
Down
” to choose Baud Rate setup.
3.5.15.2 Press ”
ENTER
” to confirm