Filter
Top Products
DTA800-B
Setting up
6
Step 3: Program the supplied
remote control
You can control TV sets of all major brands
after programming the Converter Box
remote control with the PGM key. RCA
TV sets can be controlled directly without
programming. Refer to the steps below and
the separate Program Code leafl et to guide
you through the programming.
1. Refer to the separate Program Code
leafl et. Look for the brand of your TV
set and a 3-digit program code next to
it. There may be more than one program
code available. Choose any one of them.
• If your TV set is not on the list, skip the
rest of Step 3 and go to “Step 4: Initial
setup of the Converter Box”.
2. Press PGM on the remote control. The
signal indicator on it remains lit.
3. Enter the 3-digit program code with the
number keys. Press OK for confi rmation.
The signal indicator will be off when the
program is done.
4. Press the volume keys on this
remote control to check if
they can adjust the volume
of your TV set.
• If you fail to control your TV set, repeat
steps 2 to 4 to program again. Try
another program code if there is more
than one for your TV brand.
• If the signal indicator remains lit after
blinking four times, you may have
entered the wrong code. Repeat steps 3
to 4 to program again. Make sure you
have correctly entered the code.
• You can still use your TV remote control
to turn on your TV set, select input
source and control the volume.
signal
indicator
Step 4: Initial setup of the
Converter Box
1. Press BOX on the remote
control to turn on the
Converter Box.
2. Press TV (or use the TV
remote control) to turn on
the TV set.
3. Press INPUT up to four
times (or use the TV
remote control) to select
the channel on your TV set
to view images from the
converter box.
• The following screen will appear on your
TV when the correct channel is chosen.
• If you cannot see the above screen on
your TV set, check that:
1) if the converter box has been turned
on,
2) if you have programmed the remote
control so that the TV input channel can
be selected correctly,
3) if you have correctly connected the TV
set with the Converter Box.
4. Press 1 (for English), 2 (for
Spanish) or 3 (for French) to
select the menu language.
5. Press 1 to start automatic channel search.
• To improve TV signal reception, an
optional Smart Antenna which is
compatible for connection with the
Converter Box is recommended.
Language
Choose the language to be used in the menu system.
English - 1
Español - 2
Français - 3
Menu text is displayed in English.
El texto del menú se exhibe en
español.
Le texte des menus est affiché en
français.
Channel Scan
Begin - 1
Start channel search.
Channel scan will search for channels available in your
area. You may have to re-adjust the antenna and
retry the scan to capture all available channels.
Program codes/Códigos de programa
Admiral 002, 128, 183, 189
Advent 191, 258, 260, 275
Adventura 129
DTA800B_EN(IB).indd 6 17/01/2008