RCA BRC3109 Blu-ray Player User Manual


  Open as PDF
of 24
 
16
Video Setup
1. In STOP mode, press the SETUP button. Press the button
to select Video.
2. Use the button to move the highlight bar to the right,
press the or button to select TV Shape, View Mode
and HDMI Resolution, press the OK button to select.
3. Use the or button to select your settings, then press
the OK button to confirm.
4. Press the button to go back to the previous menu.
Repeat steps 2 and 3 to adjust other options.
5. To exit the SETUP MENU and return to the normal screen,
press the EXIT or SETUP button.
TV Shape
Depending on the format of the Blu-ray Disc or DVD, you can choose the picture format (aspect ratio) best
suited to the format of your TV screen:
4:3
• Whenwide-screenvideoisplayed,thismodeclipstherightandleftsidesoftheimagesothatitcanbe
viewed on a conventional screen.
•Somewide-screendiscsthatdonotpermitPanScanmodeplaybackareautomaticallyplayedinletterbox
mode.
• Whenwide-screenvideoisplayedinthismodeonaconventionalAnalogTV,blackbandsappearatthe
top and bottom of the screen.
16:9
• Thisisthecorrectmodeforplayingwide-screenvideosononawide-screenTV(mostmodernDigital
TV’s).
Note:
• ThedisplayablepicturesizeisdeterminedbytheDVDdisc.Thereforetheplaybackpictureofsomediscs
may not conform to the picture size you select.
• Whenyouplaydiscsrecordedinthe4:3aspectratio,theplaybackpicturewillalwaysappearinthe4:3
aspect ratio regardless of the TV TYPE setting.
Customizing the Function Settings
Language Setup
1. In STOP mode, press the SETUP button. Language is
highlighted.
2. Use the button to move the highlight bar to the right,
press the or button to select Player Menu, Subtitles,
Disc Menu and Audio, press the OK button to select.
3. Use the or button to select your preferred language,
then press the OK button to confirm.
4. Press the button to go back to the previous menu.
Repeat steps 2 and 3 to adjust other options.
5. To exit the SETUP MENU and return to the normal screen,
press the EXIT or SETUP button.
Note:
• Somediscsmaynotplayintheaudiolanguageselected.Apriorlanguagemaybeprogrammedonthe
disc.
• Somediscsmaybesettodisplaysubtitlesinalanguageotherthantheoneselected.Apriorsubtitle
language may be programmed on the disc.
• Somediscsallowyoutochangesubtitleselectionsviathediscmenuonly.Ifthisisthecase,presstheMENU
button and choose the appropriate subtitle from the selection on the disc menu.
• Somediscs may notincluded yourpre-selected language.In thiscase, theDVD player automatically
displays disc menus consistent with the disc’s initial language setting.
 previous next