Filter
Top Products
Using the TV/VCR’s Features
24 Chapter 2
7. Review the information to make sure it is correct, and then press ENTER to save. If you
have made a mistake press CANCEL until the item you want to change is selected, then use
the up or down arrow button to enter the correct information.
8. Repeat steps 4-7 for additional programs.
9. Press the TIMER button (the T REC indicator on the TV/VCR’s front panel lights). To cancel
timer recording press the TIMER button again (the T REC indicator goes out).
Note: The VCR cannot be used while the T REC indicator is lit. If you want to use the
VCR, press the TIMER button to deactivate.
Copying and Editing Tapes
Use another VCR or camcorder as the playback VCR and the TV/VCR as the recording VCR.
Note: The unauthorized recording of television programs and other materials may
infringe upon the rights of others.
1. Insert a tape with the safety tab in place into the TV/VCR. The TV/VCR will turn on.
2. Press the INPUT button to tune the TV/VCR to the AUDIO/VIDEO input jacks on the back
of the TV/VCR. LINE 1 appears on-screen. Press the INPUT button again to tune the TV/
VCR to the AUDIO/VIDEO input jacks on the front of the TV/VCR. LINE 2 appears
on-screen.
3. Insert the tape you want to copy into the playback VCR or camcorder.
4. Start the playback VCR or camcorder playing. If the tape was not recorded on the playback
VCR, streaks may appear and you may need to adjust the tracking. When you reach the
place you want to begin copying, place the playback VCR or camcorder in play pause.
5. Press RECORD and PLAY simultaneously on the TV/VCR, then press PAUSE.
6. Press PAUSE on both the VCR or camcorder and the TV/VCR’s remote at the same time to
begin copying the tape.
7. Edit segments that you don’t want to copy by pressing PAUSE on the TV/VCR’s remote to
pause the tape. Then, locate the next segment you want to copy on the playback VCR or
camcorder by using FORWARD, REVERSE, or PLAY. Press PAUSE on the playback VCR or
camcorder. Press PAUSE at the same time on both the VCR or camcorder and the TV/VCR’s
remote to resume copying.
8. Press STOP on both the VCR or camcorder and the TV/VCR’s remote when you’re finished.