Filter
Top Products
23
Using the Remote
OK When in the menu system, selects highlighted items or returns you
to the previous menu.
MENU Brings up the Main menu and selects highlighted items. When in
VCR mode, it functions as a PROGRAM button.
CLEAR Removes any menu or display from the screen and returns you
to TV viewing. Also exits the GUIDE Plus+ Gold menu system.
(0-9) Number Buttons Enters channel numbers, digits for
programming the remote, and time settings directly though the remote
control. To enter a two-digit channel, press the two digits. To enter a
three-digit channel, press and hold the first digit, release, then add the
second two. Example: to tune to channel 123, press and hold 1, release,
press 2, then press 3.
WHO•INPUT In TV mode, press to toggle through the available input
sources (VID/SVID and the current channel). When using an RCA, GE, or
PROSCAN satellite receiver and in SAT mode, press to select available
channel lists.
ANTENNA Functions as TV/VCR button in VCR mode. When used with
an RCA, GE, or PROSCAN satellite receiver or cable box, ANTENNA
functions as a TV/receiver button in SAT•CABLE mode.
REVERSE, PLAY, FORWARD, REC•VCR+, STOP, PAUSE If programmed,
provides transport control for some remote-controllable VCRs, DVD
players, laserdisc players, tape decks, and CD players. Pressing REC•VCR+
when using the GUIDE Plus+ Gold System sets the VCR to record a
program.
Using the WHO•INPUT Button
Use the WHO•INPUT button to toggle through the available input
sources (VID and the current channel) and view the component you have
connected to the TV.
1. Press TV to place the remote in TV mode. Make sure that the
component you want to view is turned ON.
2. Press WHO•INPUT to tune to the available input source and view
the component.
3. Press WHO•INPUT again to tune back to the channel you were
previously watching.
Modes of Operation
Because this universal remote can control
several different components (DVD
player, VCR, cable box, etc.), it uses
operational modes triggered by the
component buttons. For example if you
want the remote to control the TV, you
would press the TV button to put the
remote into TV mode before you could
control the TV.