Filter
Top Products
5
Setup and Connections
The Basic Connection
The basic connection below (TV and VCR) is the most common
connection and is therefore used to illustrate a single component
connection with your TV. For better sound and picture quality and
multiple component connection information refer to the next section,
Advanced Connections.
Cables
You will use the following type of cable to make your connection:
How to View the VCR
To watch the VCR in this connection tune TV to Channel 3 or 4.
Later, in the Interactive Setup section you will program the TV to
automatically tune to Channel 3 or 4 when you turn on the VCR.
Coaxial Cables: In this connection, two Coaxial
Cables are used: one connects from an antenna,
cable, or cable box to the VCR, and one connects
from the VCR to the TV. These cables carry both
audio and video signals.
Once you have completed this connection you may skip to Step 3.
VCR 1
TV
AUDIO
VIDEO
OUT
IN FROM ANT
OUT TO TV
CH3
CH4
CABLE, CABLE BOX, OR
CABLE, CABLE BOX, OR ANTENNA
VIDEO
R
L
S-VIDEO
AUDIO
R
L
CABLE/
ANTENNA
G-LINK
IN
OUT
Please note that the S-VIDEO and Audio R
and L OUT jacks are not available for
models F20625 and F19625.