Filter
Top Products
30
Features and menus
MAIN MENU
1 Audio
2 Picture Quality
3 Screen
4 Channel
5 Time
6 Parental Controls
7 GUIDE Plus+ Menu
8 Setup
0 Exit
AUDIO
1 Mute
2 Tone Controls
3 Audio Processor
4 Audio Output & Speakers
0 Exit
Choice Lists
Choice lists are used to choose a particular setting from a list of settings.
1. Point to a choice on a menu and press MENU or OK to select that
choice.
Now that you know how to access the menus and adjust the control
panels, the following pages provide a brief explanation of all the menu
features. The features are organized in order of their location on the
Main Menu.
Audio Menu
Mute Press OK to reduce the TV’s volume to its minimum level. Press OK
again to restore the volume.
Tone Controls Displays the slider controls for adjusting the TV’s treble,
bass and balance.
Audio Processor Displays a choice list of available audio modes, which
control the way the sound comes through your speakers. You can also
directly access this menu by pressing the SOUND button on your remote.
Mono Plays the sound in mono only. Use this setting when
receiving broadcasts with weak stereo signals.
Stereo Splits the incoming stereo audio signal into left and right
channels. Most TV programs and recorded materials have stereo
audio. The TV displays the word STEREO when you tune to a
program that is broadcast in stereo.
Sound Logic™ Stereo Sound Logic technology monitors a
program’s audio track and limits volume excursions to a minimum
and maximum volume range from the current volume setting.
Acting like a dynamic range, it compresses to limit sudden volume
increases, like when a commercial comes on.
CLOSED-CAPTION MODE
1 CC1
2 CC2
3 CC3
4 CC4
5 Text1
6 Text2
7 Text3
8 Text4