Filter
Top Products
55
Reference
Care and Cleaning
CAUTION: Turn OFF your TV before cleaning.
You can clean the TV as required, using a soft lint-free cloth. Be sure to occasionally
dust the ventilation slots in the cabinet to help assure adequate ventilation.
The TV’s screen may be cleaned with a soft, lint-free cloth as well. Take care
not to scratch or mar the screen. If necessary, you may use a cloth dampened
with warm water.
Never use strong cleaning agents, such as ammonia-based cleaners, or
abrasive powder. These types of cleaners will damage the TV.
While cleaning do not spray liquid directly on the screen, or allow liquid to run down
the screen and inside the TV. Also, avoid placing drinks or vases with water on top of
the TV. This could increase the risk of fire or shock hazard or damage to the TV.
Caution: Using video games or any external accessory with fixed images for extended
periods of time can cause them to be permanently imprinted on the picture tube (or
projection TV picture tubes). ALSO, some network/program logos, phone numbers,
etc. may cause similar damage. This damage is not covered by your warranty.
G-LINK Cable not working
• Check to make sure the wands are positioned correctly.
• GUIDE Plus+ Gold System control of cable box is slower than direct control of the
box itself. Keep this in mind when changing channels.
Incorrect GUIDE Plus+ Gold System channel map
• The guide may get out of sync with the cable provider. Use setup to change the
zip code to 99999. Turn the TV off for ten minutes. Use setup again to change the
zip code to the correct value. Be sure to select the correct lineup if asked.