Filter
Top Products
26
Resetting your settings
The Reset function returns your settings to the
factory settings.
1
Press SETUP/TV MENU in the TV mode. The TV
menu screen will appear.
2
Press ▲ or ▼ to select “Setup” , then press ▶ or
ENTER.
3
Press ▲ or ▼ to select “Reset”.
Video Label >>
Auto Shut Off Off
Setup
: Select ENTER:Set
Closed Caption >>
Language English
Reset >>
4
Press ▶ or ENTER to return your settings to the
factory settings.
5
“Reset” will appear on the screen approx. 3
seconds, then it returns to the normal screen.
Picture Preference Sports
Picture Size >>
Film Mode On
Picture
Picture Setting >>
: Select ENTER:Set
PC Setting >>
DNR On
Treble
Balance
MTS Stereo
Surround Off
Audio Language No Info.
Audio
15
0
: Adjust
15
Bass
: Select
NOTE:
“Picture Size” in Picture menu cannot be reset by
this function.
“MTS”, “Audio Language” and “HDMI 1 Audio” in
Audio menu cannot be reset by this function.
•
•
Preparation
The following pages describe the setup/
operation in DVD mode.
Preparation
Before DVD/CD operation, please make the following
preparations.
1
Insert the AC cord plug into a standard 120V
60Hz polarized AC outlet.
If the AC cord plug is plugged in for the first
time, wait for about 5 seconds before pressing
POWER.
NOTE:
When connecting to other equipment, unplug
the unit from the AC outlet.
•
•
2
Press POWER on the unit or on the remote
control to turn on the unit. The POWER indicator
will change to green.
Each time you turn the unit ON, the TV/DVD
starts from the TV mode.
When using an amplifier, switch on the amplifier.
•
•
3
Press TV/DVD to select DVD mode.
The DVD startup screen will appear on the screen.
NOTE:
If the unit does not operate properly:
Static electricity, etc., may affect the player’s
operation. Disconnect the AC power cord once,
then connect it again.
Status display of disc
Press DISPLAY. The status display of the disc will
appear on the screen.
DVD 00:15:25 01:41:39
Title 1/3 Chapter2/24
1/1 Eng Dolby Digital 1/2 Eng
1/1
DISC OPERATION
ELAPSED
TIME
TOTAL
TIME
CHAPTER
NO.
SUBTITLE LANGUAGE
A KIND OF AUDIOAUDIO LANGUAGE
ANGLE NO.
TITLE NO.
To make the status display screen disappear, press
DISPLAY again.
Playback procedure
1
Press TV/DVD to select DVD mode.
2
Place the disc in the
disc slot with the label
side facing forward. (If
the disc has a label.)
Hold the disc without
touching either of its
surfaces, align it with
the guides, and place it
in position.
•
52K0101A_eng.indd 2652K0101A_eng.indd 26 3/12/09 3:10:58 PM3/12/09 3:10:58 PM