Filter
Top Products
Chapter 1: Getting Started
5
Graphics contained within this publication are for representation only. Your unit might differ slightly.
The Buttons on the Remote Control
0-9 (Number buttons) Enter channel numbers directly through the remote control. This button
can also be used to select numbered menu items directly.
To enter a two-digit channel, press the two digits. To enter a three-digit channel, press and hold
the first digit for two seconds until two dashes appear to the right of the number, then add the
second two. Example: to tune to channel 123, press and hold 1 for two seconds, press 2, then
press 3.
Arrow buttons Use the navigation arrows to move the on-screen highlight up, down, left or
right. You can also use the arrows to modify some settings in the menu system.
ch + and ch – Scan up or down through the current channel list. Press once to change the
channel up or down; press and hold to continue changing channels.
clear Removes any menu or display from the screen and returns you to TV viewing. Also
cancels the SKIP timer.
info Brings up available channel information.
input Changes your TV to its video input channel. The Video Input Channel is the channel
your TV must tune to in order for you to access a component that’s connected to the AUDIO and
VIDEO jacks on the front of your TV. Example: to view a tape from your camcorder, connect the
camcorder to the TV’s AUDIO and VIDEO jacks on the TV’s front panel with the audio/video
cables.
menu Brings up the Main menu.
mute Lowers the volume to its minimum level. Press again to restore volume.
ok Use to select on-screen items.
Continues on next page...