RCA P52936 Projection Television User Manual


 
50
Features and menus
Setup
The Setup menu allows you to access the GUIDE Plus+ system setup
information. To access the Setup option:
1. If the GUIDE Plus+ system isnt on your screen, press GUIDE on your
remote control.
2. Press MENU to select the Menu Bar.
3. Use the right arrow to highlight the Setup menu selection.
4. Use the up and down arrows to select Change system settings, Review
options, or View demo.
Change system settings Confirms the settings you completed in
the GUIDE Plus+ system setup are correct.
Review options Displays the GUIDE Plus+ auto display options.
On Automatically displays the GUIDE Plus+ system when you
press the ONOFF button on the remote control.
Off Disables the GUIDE Plus+ system from being displayed when
you press the ONOFF button on the remote control.
View demo Runs the GUIDE Plus+ system demonstration.
Note: If you have not completed your GUIDE Plus+ system setup, these
options will not be available. A screen will prompt you to complete your
setup.
How to Get More Information About an
Advertisement or a Program
To find out more information about a program, advertisement or special,
use the left arrow button to highlight the channel listing or promotional
information box.
Requesting more information about a particular show displays the
PlusCode programming number and the Shows on Next for that channel.
Press the INFO button to exit the expanded information screen.
PIP (Picture-in-Picture) Operation
The PIP (picture-in-picture) feature lets you display a second, smaller
picture on top of the main picture. If the PIP window is displayed, and you
change the PIP input (by pressing WHO•INPUT) to COMP2, PIP is not
displayed. If you press the PIP button while viewing COMP2, the PIP
window is not available. (N/A) appears in the channel marker.
Important: Your TV has a single tuner that tunes to cable or off-air
television channels. In order for the second picture (the PIP picture) to
appear on the screen, you must connect another component (like a
satellite receiver or VCR) to the TV. You need to use audio/video cables to
connect the component to the TV. Go to the Setup and Connections
section for more information.
Promotional Information