Filter
Top Products
24
Setting Up the VCR
Set Auto Repeat
A tape can be set to play the same segment over and over in a
repeating loop with the Set Auto Repeat feature. Set Auto
Repeat uses the VCR’s memory counter to determine the
duration of the loop.
The Set Auto Repeat dialog box will ask for a loop end time to
be specified:
AUTO REPEAT
Set the length of time
you want the tape to
play in a repeating loop
Loop from 0:00 to
-:--
(h:mm)
Press CLEAR to turn off
Press MENU to exit
• The CLEAR key will erase all three numbers entered and
move the cursor back to the first position (hours).
• The “Press CLEAR to turn off” message will appear only
after the first number has been entered into the end
time.
• Auto Repeat is set back to -:-- by resetting the dialog
box, by cassette ejecting or insertion, by powering off
the VCR, by power interruption, or by recording start.
When a duration time has been set:
• The VCR will automatically switch to rewind if
the counter meets or goes past the Auto Repeat set
duration.
• The VCR will automatically switch to playback during
rewind if the counter equals or is less than 0:00.
• The Auto Repeat may be adjusted by setting the
counter to 00:00. This can be done by pressing the
CLEAR button while the tape counter is on screen or on
the front panel display.
• The counter will not reset while rewinding in an Auto
Repeat loop.