Filter
Top Products
Chapter 1: Getting Started
5
Graphics contained within this publication are for representation only. Your unit might differ slightly.
MUTE
PREV CH
INPUT SKIP
DISPLAY
1
456
32
798
0
POWER
MENU
CLEAR RESET
CHAN
VOL
VOL
CHAN
The Buttons on the Remote Control
0-9 (Number buttons) Enter channel numbers directly through the remote control. This button
can also be used to select numbered menu items directly.
To enter a two-digit channel, press the two digits. To enter a three-digit channel, press and hold
the first digit for two seconds until two dashes appear to the right of the number, then add the
second two. Example: to tune to channel 123, press and hold 1 for two seconds, press 2, then
press 3.
CHAN (up and down) buttons Scan up or down through the current channel list. Press once
to change the channel up or down; press and hold to continue changing channels. Also used as
up and down arrows in the menu system.
CLEAR Removes any menu or display from the screen and returns you to TV viewing. Also
cancels the SKIP timer.
DISPLAY Brings up available channel information. This button is also referred to as INFO in
the TV’s menu system.
INPUT Changes your TV to its video input channel. The Video Input Channel is the channel
your TV must tune to in order for you to access a component that’s connected to the AUDIO and
VIDEO jacks on the front of your TV. Example: to view a tape from your camcorder, connect the
camcorder to the TV’s AUDIO and VIDEO jacks on the TV’s front panel with the audio/video
cables.
MENU Brings up the Main menu. When in the menu system, selects highlighted items or
returns you to the previous menu.
MUTE Lowers the volume to its minimum level. Press again to restore volume.
Continues on next page...