RCA VR648HF VCR User Manual


 
Chapter 3: VCR Features
Chapter 3 17
Recording Features
Your VCR provides many ways to record programming. Basic recording is explained on page 10.
The following recording techniques are also available.
Recording – lets you press one button to record a program.
Express Recording (XPR) – allows recording to start while a program is being watched.
This feature automatically stops recording after a designated period of time.
Timer Recording – program the VCR for a daily, weekly, or onetime recording which will
automatically start and stop at the times you set.
Express Recording (XPR)
Use XPR to quickly record the remaining portion of a program being watched. XPR is a great
way to capture the end of a sporting event that has run into overtime or a live broadcast that
runs long. XPR works in 30- or 60-minute increments. You can capture the last 30, 60, 90, etc.
minutes of programming (depending on tape length), up to four hours total.
To Activate XPR:
1. Turn on the VCR and tune it to the channel with the desired
programming.
2. Insert a tape with its safety tab in place into the VCR. Make sure it
is cued to record at the proper starting point.
Note: To override the preferred tape speed setting, press the
SPEED button on the remote control repeatedly to toggle
between SP and SLP choices.
3. Press the RECORD button to start recording.
4. Repeatedly press RECORD to set up the recording duration.
Press RECORD until RECORD TIME 0:00 appears.
Each press of the RECORD button adds 30 or 60 minutes of
recording time.
The VCR automatically turns off after it has recorded the set
amount of time.
To stop an XPR recording, press and hold the STOP button for
several seconds until STOP appears on the VCR on-screen
display.
Rec Ch 36
Record Length 0:00
Press REC to set length
Rec Ch 36
Record Length 1:30
Press REC to set length