RCA VR648HF VCR User Manual


 
Chapter 1: Connections & Setup
6 Chapter 1
TV + VCR + Satellite Receiver
1. Connect the VCR to the TV
A. Connect one end of the supplied RF coaxial cable to the RF OUT jack on the back of the
VCR and the other end to the TV’s antenna in jack (sometimes labeled CABLE/ANTENNA).
– OR –
B. Connect audio/video cables to the AUDIO OUT R and L jacks on the back of the VCR
(color coded, red and white), and to the VIDEO OUT jack (yellow). Connect the other
ends of the cables to the corresponding input jacks on the TV (sometimes labeled VIDEO,
AUDIO L/MONO, and AUDIO R).
2. Connect satellite receiver to the VCR
A. Connect an RF coaxial cable to the RF output jack on the satellite receiver (sometimes
labeled OUT TO TV) and to the ANT. IN jack on the VCR.
– OR –
B. Connect audio/video cables to the AUDIO IN R and L jacks on the back of the VCR (color
coded, red and white), and to the VIDEO IN jack (yellow). Connect the other ends of the
cables to the corresponding output jacks on the satellite receiver (sometimes labeled
VIDEO, AUDIO L, and AUDIO R).
3. Connect the antenna to your satellite receiver
If necessary, connect an antenna or cable box RF coaxial cable (not included) to the antenna
input jack on the satellite receiver (sometimes labeled IN FROM ANTENNA).
4. Connect the satellite feed to the satellite receiver
If it’s not already connected, connect the satellite receiver’s RF coaxial cable feed (not
included) to the satellite input jack on the satellite receiver (sometimes labeled
SATELLITE IN).
Go To Page 8
V
C
R
T
V
S
a
t
e
l
l
i
t
e
CABLE/
ANTENNA
VCR
TV
VIDEO
R
L / MONO
S-VIDEO
AUDIO
L
IN
OUT
CH3
CH4
S-VIDEO
L
R
VIDEO
OUT
IN FROM ANT
OUT TO TV
SATELLITE
IN
From
Satellite
From Cable
or TV Antenna
ANT. IN
RF OUT
VIDEO
AUDIO
OUT
IN
R
L
SATELLITE
RECEIVER