Filter
Top Products
1211
Learning Function
1. Place the RCA remote control
unit and the Original remote
control unit so that they face
each other. They should not be
any more than 2 inches apart.
2. Press and hold the CODE
SEARCH button until the INDI-
CATOR LIGHT lights, then release
the CODE SEARCH button.
3. Press and release the desired
Mode button (TV, VCR, CABLE,
SAT, etc…). The INDICATOR
LIGHT will blink off once button
press is accepted.
4. Press and release the LEARN
button.
5. Press and release the valid button
to be learned on the RCA remote
in which you will store a new
function. The L1, L2, L3, L4, or
other functions keys may be used
in this programming mode.
6. Press and hold the button on
the original remote control until
INDICATOR LIGHT on the RCA
remote blinks once. Once the
INDICATOR LIGHT blinks you
may continue with the next
function.
If there is error in learning the new
function the INDICATOR LIGHT
will flash for 3 seconds but remain
in the learning mode. Return to step
5 if the INDICATOR LIGHT flashed.
NOTE: Hold the function key on your original
remote for at least 3 seconds for the
command to be successfully learned.
7. Repeat steps 5 and 6 to store
more functions.
8. Once the selected functions are
stored press the CODE SEARCH
button and the remote will return
to original operation mode.
The learning feature is used as a supplement to the standard
preprogrammed library. The standard code library provides most
of the functions needed, but you can add a small number of
additional functions of your choice.
NOTE: • No functions may be stored under the LEARN, SLEEP, CODE
SEARCH, MENU or any of the device button.
INDICATOR
LIGHT
(BLINK)
CODE
SEARCH
CODE
SEARCH
CODE
SEARCH
CODE
SEARCH
Clearing A Learned Button
1. Press and hold the CODE-
SEARCH button until the
INDICATOR LIGHT lights,
then release the CODE
SEARCH button.
2. Press and release the desired
Mode button (TV, VCR,
CABLE, AUX, etc…).
The INDICATOR LIGHT will
turn off once the button press
is accepted.
3. Press and release the LEARN
button twice. The INDICATOR
LIGHT will turn off once the but-
ton press is accepted.
4. Press and release the CODE
SEARCH button and the remote
will return to original operation
mode. All learned command
functions under the device are
now cleared.
To clear a learned button sequence, use the procedure below.
NOTE: .• No functions may be stored under the LEARN, SLEEP, CODE
SEARCH or any of the device button
Clearing All Learned Buttons or Functions
1. Press and hold the CODE
SEARCH button until the
INDICATOR LIGHT lights,
then release the CODE SEARCH
button.
2. Press and release the LEARN
button twice. The INDICATOR
LIGHT will light off once the
button press is accepted.
3. Press and release the CODE
SEARCH button and the remote
will return to original operation
mode. All learned command
entries are now cleared.
This procedure will erase all learned functions in every
device mode. This step is recommended when attempting
any learning of a new function from a new remote.
VCR
O
N
• O
FF
PLAY
STOP
CH +
FOR
W
ARD
PAUSE
ENTER
TV
• VCR
REVERSE
RECORD
CODE SEARCH
TV
C
ABLE
SAT • AUX
VOL
CHAN
PREV CH
MUTE
OFF/ON
CODE
SEARCH
CABLE
VCR
TV
1
2
3
5
6
2 INCHES
2 INCHES
(BLINK)
(BLINK)
INDICATOR
LIGHT
CODE
SEARCH
INDICATOR
LIGHT
CODE
SEARCH
RCU410MSL_IB 10/4/01 1:57 PM Page 12