Filter
Top Products
10
RCA, GE, and ProScan televisions use three
different menu systems. Read the following
descriptions, and choose the one that matches
your TV.
System 1: If you use MENU, +, and – buttons
on your current remote, substitute them with
MENU•PROG, and the + and – (arrow)
buttons on this remote, and refer to your TV
owner’s manual for operating instructions. The
remote is already set-up to operate this menu
system. Program the remote with TV code 101.
System 2: If you use MENU, CHANNEL UP,
CHANNEL DOWN, VOLUME UP, and VOL-
UME DOWN buttons on your current remote,
substitute them with MENU•PROG, and the
(arrow) buttons on this remote, and refer to
your TV owner’s manual for operating
Instructions.
System 3: If you use SETUP, VIDEO, AUDIO,
+, and – buttons on your current remote, sub-
stitute them with MENU•PROG, (up arrow),
(down arrow), and the + and – (arrow) but-
tons on this remote, and refer to your TV own-
er’s manual for operating instructions.
MENU/PROG = SETUP
UP = AUDIO
DOWN = VIDEO
The remote must be programmed with TV
code 109. Refer to the procedure on page 5.
Using the Menu Functions for RCA Televisions
Using the Menu Functions for Other Televisions
You will have to experiment with the remote to determine the
buttons which will work with your TV.