Filter
Top Products
17
Adjusting the Picture
Press MENU button on the remote control, then press t/u Arrowbutton to select
“PICTURE” menu.
1) Adjusting Picture Mode
Press q/p Arrow button to select “PICTURE MODE” , and press t/u Arrow
button to adjust picture mode to your desire.
Note: “BRIGHTNESS” , “CONTRAST” , “COLOR” adjusting are only available in
preference mode.
2)Adjusting the Brightness of picture
Press q/p Arrow button to select “BRIGHTNESS” , and press t/u Arrow button
to adjust brightness to your desire.
3)Adjusting the Contrast of picture
Press q/p Arrow button to select the “CONTRAST”, then press t/u Arrow
button to set contrast to your desire.
4)Adjusting the Tint of picture
Press q/p Arrow button to select the “TINT”, then press t/u Arrow button to set
tint to your desire.
Note: Only available in NTSC.
5)Adjusting the Color of picture
Press q/p Arrow button to select the “COLOR”, then press t/u Arrow button to
set saturation to your desire.
6)Adjusting the Sharpness of picture
Press q/p Arrow button to select the “SHARPNESS”, then press t/u Arrow
button to set sharpness to your desire.
7)Adjusting the Backlight of picture
Press q/p Arrow button to select the “BACKLIGHT”, then press t/u Arrow
button to set backlight to your desire.
Note:Backlight function is only available for models with this function.
8)Adjusting the Color Temp of picture
Press q/p Arrow button to select the “COLOUR TEMP.”, then press t/u Arrow
button to set colour temperature to your desire.
9)Adjusting the Scale Mode of picture
Press q/p Arrow button to select the “SCALE”, then press t/u Arrow button to
set scale mode to your desire.
Basic operation (to be continued)
PICTURE
AUDIO
CHANNEL
FUNCTIONSETTING
MENU
EXIT
SELECT
ADJUST
PICTURE MODEPREFERENCE
FULL
STANDARD
BRIGHTNESS
CONTRAST
COLOR
SHARPNESS
BACKLIGHT
COLOUR TEMP.
SCALE
50
50
50
50
50
TINT
50