Filter
Top Products
- 14 -
CLOSED CAPTIONING
• Let you change the closed caption appearance
(font, text color, text opacity, background color,
background, edge effect and edge color).
• Press 1 (Font Options) to change font color
and effects, 2 (Back Options) to change
background color and effects or 3 (Default) to
reset to default settings.
• Only digital closed captions can be changed.
• For more information, see "Advantages of
closed captioning on the Converter Box" on
Page 17.
Closed Captioning
Default 3 Reset to default settings
Back Options 2 Adjust backgroundcolorand
effects
Captioning helps the hearing impaired enjoy TV
programs
Exit Exit Menu Back
Move Enter Choose
Font Options 1 Adjust fontcolorandeffects
• Six sub-menus are available.
• Press 1 for Channel Scan
– To start automatic channel scan.
– To scan more channels (Scan Add) after
adjusting your antenna.
– Enable the "Scan Add" option if you only want
to scan more channels with keeping existing
channel list.
• Press 2 for Language
– To select the menu language.
• Press 3 for Power Saver
– An energy saving feature to turn off the converter box automatically after 4 (default), 8 or 12
hours according to your selection. Select OFF to de-activate this feature.
– The timer is only active when the converter box remains idle (i.e. no key activation). Once any “Box”
key is pressed, the timer will be reset.
– If you have set up timer recordings for TV programs, make sure the converter box will not turn
off automatically before the recordings fi nish.
• Press 4 for Antenna
– To show the signal strength for receiving broadcast from a TV station. If signal is weak, you may
need to adjust the antenna.
• Press 5 for Time Zone
– This option is for time-zone identifying local time. You can select the time zone from Automatic
Eastern / Central / Mountain / Pacifi c / DST.
• Press 6 for System Reset
– To restore all settings to factory defaults.
Settings
These functions are typically only necessary when first
setting up the system or when a problem occurs
Language 2 Select language used in menu
Power Saver 3 Turns off power automatically
Antenna 4 Signal strength meter
Time Zone 5 Options for setting local time
System Reset 6 Return system to factory settings
Exit Exit Menu Back
Move Enter Choose
Channel Scan 1 Search for valid channels
SETTINGS