Filter
Top Products
- 5 -
QUICK START GUIDE
STEP 2: TURNING ON THE UNIT
1. While the AC adapter is connected and the unit is in standby mode, power will be consumed and
the power indicator is RED.
2. Press the
STANDBY/ON button to turn on the unit. The power indicator is GREEN.
STEP 5: VIEWING THE TV CHANNEL
There are two methods to view your desired channel.
Method 1: The Channel List shows after scanning, press
/ button to highlight a channel and
press ENTER to start viewing.
Method 2: Press the CH+/CH- buttons to select a channel, or press the number button on the remote
to select the channel you want to watch.
Please read the Instruction Manual for further details on using the Converter Box.
1. Press 1 button on the remote control to start
automatic channel search.
2. When the scan finishes, the Channel List
menu displays the found channels.
STEP 4: SEARCHING FOR CHANNELS AUTOMATICALLY
1. The right screen can be seen on your TV when
the correct channel is chosen.
2. If you can't see the right screen on your
TV set, please check: if the converter box
has been turned on or if you have correctly
connected the TV set with the Converter Box.
3. Use the / button then press the ENTER
button, or press 1 (for English), 2 (for Spanish)
or 3 (for French) to select the menu language.
STEP 3: SETTING THE OSD LANGUAGE
Language
Move Enter Choose
Choosethelanguage ebto usedinthemenusystem.
Español-2_Eltextodelmenúseexhibe
Français-3_Letextedesmenusestaffichèen
en
English-1_MenutextisdisplayedinEnglish.
español.
français.
Channel Scan
Exit Exit Menu Back
Move Enter Choose
Channel scan will search for channels available in your
area you may have to re adjust the antenna and
retry the scan to capture all available channels
Done 2
Show channel list
Total number of discovered channels 0
Start channel searchBegin 1