Filter
Top Products
16
Recording a Program
Recording While You’re Away (Timer Recording)
Timer recording lets you program the TV/VCR to record up to eight different programs
within a one year period. Before setting the timer, make sure that the clock is set
correctly.
Setting a Timer Recording
1. Press MENU to display the TV/VCR MAIN MENU.
2. Press 1 to display the PROGRAMMING menu.
3. Press 1 to Create a new program.
4. Press 1, 2, 3, or 4 to select the type of program.
1 One time — single program recorded once.
2 Daily — program recorded at same time every day.
3 Weekdays — program recorded at same
time Monday through Friday.
4 Weekly — program recorded at same time
once a week.
5. Press number buttons to enter the channel number,
start time including AM or PM, end time, and start date
of the recording. Just follow the on-screen prompts.
• If recording from the AUDIO/VIDEO IN jacks, press 00
to select the line input (VIDEO) instead of a channel.
Press CLEAR to correct an entry.
6. Press SPEED to select a recording speed.
7. Press MENU to save your program.
8. Repeat steps 3 – 6 for additional programs.
9. Insert a tape with safety tab intact before the recording
is to begin.
The TIMER indicator lights in the TV/VCR’s front
panel.
If you turn the TV/VCR off, the TIMER indicator will
flash if there is no cassette in the TV/VCR or the safety
tab is missing from the cassette.
10. If using a cable box, turn it on and tune it to the
channel you want to record before time for the
recording to begin.
TIMER REPEAT REW PLAY F.FWD REC
POWER
STOP/EJECT
CH
VOL +VOL –
CH
WAKE-UP
TIMER Indicator
TV/VCR MAIN MENU
1 Programming
PROGRAMMING
1 Create a new program
When should this
program occur?
1 One time
2 Daily (every day)
3 Weekdays (M-F)
4 Weekly (once per week)
Program 1 (One Time)
Channel --
Program 1 (One Time)
Channel 08
Start Time --:--
Program 1 (One Time)
Channel 08
Start Time 02:10 PM
End Time --:--
Program 1 (One Time)
Channel 08
Start Time 02:10 PM
End Time 03:35 PM
Start Date 11/18/94 Fri
Tape Speed SLP
Press CLEAR to correct
Press MENU to save