Filter
Top Products
Entering the TV Menu Mode:
1. Push the TV button on the remote.
2. Push the MENU button.
This puts the remote in TV Menu
Mode. The TV Menu should now be
visible on the television. The
INDICATOR LIGHT will blink
continuously to indicate the remote is
now in TV Menu Mode.
While in TV MENU these buttons will
function as follows:
VOL UP/DOWN buttons will operate
as CURSOR RIGHT/LEFT.
CH+/- keys will operate as CURSOR
UP/DOWN.
For RCA, GE, ProScan TVs pushing
the MENU button will select the high
lighted item. The numeric buttons
may also be used to select the MENU
choice. The ENTER key may also be
used to select all menu choices.
Note: Not all functions in competitive
models and brands of televisions may
be fully supported.
Exiting the TV Menu Mode:
To exit the Menu Mode and clear the
TV screen push the TV button on the
remote. The INDICATOR LIGHT
should go out indicating the remote is
now out of TV Menu Mode and will
revert to it’s normal mode of
operation.
Note: The remote will automatically
exit the TV Menu Mode after 10
seconds of inactivity with no buttons
being pushed.
Special notes:
1. Because of the wide variety of menu
formats, some experimenting may be
required.
2. SONY: Pressing the ENTER button
while in menu mode returns to
previous menu.
3. ZENITH: Push the menu button a
second time to move from the SET-UP
MENU to the VIDEO MENU.
TV
TV
(BLINK)
Television Menu Function
OR
The TV Menu is used to make changes in the TV settings such as
setting color, channels, timers, etc.
Entering the DBS Menu Mode:
1. Push the DBS•CABLE button on the
remote.
2. Push the MENU key.
This puts the remote in DBS Menu
Mode. The DBS Menu should now be
visible on the television. The INDIC
TOR LIGHT will blink continuously to
indicate the remote is now in DBS
Menu Mode.
While in DBS MENU MODE these
buttons will function as follows:
VOLUME UP/DOWN button will
operate as CURSOR RIGHT/LEFT.
CH+/- button will operate as CURSOR
UP/DOWN.
For RCA, GE, ProScan DBS systems
pushing the MENU button will select the
highlighted item. The numeric buttons
may also be used to select the MENU
choice. The ENTER key may also be used
to select all menu choices.
Note: Not all functions in competitive
models and brands of DBS systems
may be fully supported.
Exiting the DBS Menu Mode:
Push the DBS•CABLE button on the
remote. The INDICATOR LIGHT
should go out indicating the remote is
now out of DBS Menu Mode and will
revert to it’s normal mode of
operation.
Note: The remote will automatically
exit the DBS•CABLE Menu Mode after
10 seconds of inactivity with no keys
being pushed.
Special notes:
1. Because of the wide variety of menu
formats, some experimenting may be
required.
2. SONY: Pressing the ENTER button
while in menu mode returns to
previous menu.
(BLINK)
DBS Menu Function
DBS•CABLE
DBS•CABLE
OR
The DBS Menu is used to navigate thru the Guide screens, to make
changes in the DBS settings such as channel lists,
passwords, etc.
11 12
RCU410MS_IB 10/4/01 1:59 PM Page 11