Filter
Top Products
Entering the DVD Menu Mode:
1. Push the DVD•AUX button on the
remote.
2. Push the MENU key.
This puts the remote in DVD Menu
Mode. The DVD Menu should now be
visible on the television. The INDIC
TOR LIGHT will blink continuously to
indicate the remote is now in DVD
Menu Mode.
While in DVD MENU MODE these
buttons will function as follows:
VOLUME UP/DOWN button will
operate as CURSOR RIGHT/LEFT.
CH+/- button will operate as CURSOR
UP/DOWN.
Pushing the ENTER button will select the
highlighted item. The numeric buttons
may also be used to select the MENU
choice.
Note: Not all functions in competitive
models and brands of DVD systems
may be fully supported.
Exiting the DVD Menu Mode:
Push the DVD•AUX button on the
remote. The INDICATOR LIGHT should
go out indicating the remote is now out
of DBS Menu Mode and will revert to
it’s normal mode of operation.
Note: The remote will automatically
exit the DVD•CABLE Menu Mode
after 15 seconds of inactivity with no
keys being pushed.
Special notes:
1. Because of the wide variety of menu
formats, some experimenting may be
required.
(BLINK)
DVD Menu Function
DVD•AUX
DVD•AUX
The DVD Menu is used to navigate thru the Navigation screens, to
change settings such as language, sub-titles, etc.
13 14
Sleep Feature
This feature will turn off your TV at the time you choose from 1 to 99
minutes.
To Program Sleep Feature:
1. Press and hold the SLEEP
button. INDICATOR LIGHT
will stay lit. Release the SLEEP
button.
2. Enter time in minutes using the
numerical key pad. Indicator
light should go off.
(Minutes 1 thru 9: press 0
before the actual number
Maximum: 99 minutes)
3. Leave remote aimed at
television. (Sleep Feature will
not work unless remote is left
aimed at television.)
ON OFF
INDICATOR
LIGHT
To Turn Off The Sleep Timer:
Sleep timer program will be can-
celled and reset to zero by either of
the following:
1. Press and hold SLEEP
button until INDICATOR
LIGHT blinks or press
ON•OFF button, turning
TV OFF.
(BLINK)
RCU410MS_IB 10/4/01 1:59 PM Page 13