Filter
Top Products
38
OTHER FEATURES
Pro-Tect Plus
™
Locking Feature
To disable the usage of the VCR, or to protect your timer
recordings, you can lock the VCR so that the buttons on the VCR
or remote won’t work.
• To Lock: Press and hold VCR on the r emote for
approximately six seconds. SAFE appears in the display to let
you know the feature is activated.
• To Unlock: Press and hold VCR on the r emote for
approximately six seconds.
INDEX SEARCH
The VCR has a “VHS Index Search System” that automatically
records an index mark on the tape every time you start a
recording. During playback you can locate the program you want
to play by the number of index marks or by scanning. The VCR
will search forward or reverse from the location you are on
the tape.
To Search:
1. Press ST OP.
2. Press SEARCH on the remote to display the INDEX SEARCH
menu on the TV screen.
3. If you want to search through a certain number of index
marks, press two number buttons to enter the number of
marks you want to search. Press CLEAR on the remote to
correct an entry.
4. Press FWD to search forward or REV to search in reverse. The
VCR will locate your index mark and begin playback. If you
did not enter a specific index number, the VCR will locate the
next index mark and begin playback.
5. Press STOP to stop index searching.
Some index marks may be missed by the VCR:
• A mark too close to your location on the tape.
• The mark at the beginning of a recorded segment of five
minutes or less.
• The first index mark on the tape when you start at the
beginning of the tape.
INDEX SEARCH
Press REV OR FWD
to begin scanning
OR
enter a specific
index number
_ _
Press SEARCH to exit
INDEX SEARCH
Searching for
index number 12...
Press STOP to cancel
INDEX SEARCH
Searching for
index marks...
Press STOP to cancel