Filter
Top Products
Recording While You’re Away (Timer Recording)
The VCR Plus+ and timer program features let you program the VCR to record up to eight
different programs within a one year period. Before setting the timer, make sure that:
* Cable box set up has been completed if you use a cable box.
* The clock is set correctly.
* A tape with safety tab has been inserted with enough tape to record the programs.
. The remote is set to contro1 the VCR-using
VCR1 (VCR2).
Setting a Timer Recording
1.
2.
3.
4.
5.
6.
Press
PROGNCR+ on
the remote to display the menu.
If
VCR PLUS menu
appears, press
PROGNCR+ again.
Press
2 to display
the PROGRAM TIMER menu.
Press 1, 2, or 3 to select type of program.
1 ONE-TIME PROGRAM -single
program.
2 DAILY PROGRAM Monday through
Friday.
3
WEEKLY PROGRAM-same program once a week.
Press numbers on the remote to enter the channel number
(or INPUT to
select line input), time to begin, time to turn off,
and date of the recording. Just follow the on-screen prompts.
Select recording speed using
SPEED on the remote.
Press PROGNCR+ to enter your program. A
reminder
appears which will time out or you can press
PROGNCR+ to
return to the VCR MAIN MENU.
PROGRAMS OVERLAP may appear on the screen
if you have
entered two programs where the times overlap.
Repeat steps 1-6 for additional programs.
Turn off the VCR before recording begins.
TIMER should
appear in the VCR’s display panel.
If using a cable box, turn on the cable box and tune it to the
channel you want to record before the time the recording is to
begin.
Checking or Clearing VCR Plus+ and Timer Recordings
1.
Press
PROGNCR+ on remote to
display
VCR MAIN MENU on
TV screen.
If VCR PLUS menu appears, press PROGNCRc
again.
2. Press 3 for
REVIEW PROGRAMS.
Each entered program is
displayed for a few seconds in
sequence.
3. Press
DISPLAY or 3 to display information at a faster pace.
4. Press CLEAR when the program you want to ei-ase appears on
the screen.
5. Press PROGNCR+ on remote to remove
display from the TV
screen.
23
m
I