Filter
Top Products
M208 Re:control
A-4
Batteries
Because the M208 uses the latest
processor technology with very
low current requirements, you will
not have to change the batteries
very often. In the following
chapters, you will find out how
your settings affect the current
consumption and therefore the
working life of the batteries.
Open the battery compartment
cover on the underside of the
remote control, to insert new
batteries. Insert the four batteries
as shown on the bottom of the
battery compartment.
You should only use Alkaline LR
03/AAA batteries, also known as
Micro and they must be inserted
with correct polarity.
Revox does not recommend the
use of rechargeable batteries.
Because of the low voltage of 1.2V
as compared to 1.5V, as well as
the high levels of self-discharge by
rechargeables (particularly with
NIMH models), the battery
warning display appears
frequently and without justification.
Advice on the disposal of
batteries
Used batteries should be disposed
of at recognised battery collection
points or through the shop where
you bought them.
Care
The remote control should be
cleaned using just a damp, soft
and clean cloth without any
cleaning agents.
If any liquid should get into the
remote control, the unit should be
returned to Revox. The Revox
Service Department cleans the
M208 and if necessary, will
replace the keypad mat. Never
open the remote control yourself
as you could damage sensitive
components through a discharge
of static electricity and nullify any
guarantee rights.