Filter
Top Products
Chapter 3 How to Set Your Re:control M207
23
When you are in this page, you will find out an icon
located on the top-right position. It is “Key Pad Entry”
function. You can key in the number for your codes
directly by searching from the “Pre-programmed code list”.
In this way, you can save some time than using the auto
searching function. However, each brand may have
several codes. You may need to load the codes to test the
correct codes for your device.
3. After selecting “Brand” item, please make sure that the targeted
device is turned on.
4. Please have the Re:control M207 pointed to your device and tap
“GO
” o to start auto searching.
5. When the Re:control M207 finds out the correct remote code for
your device, your device will be turned off. Please tap or press
any button on the Re:control M207 to stop auto searching.
6. Please press or p key to ascertain that the remote
codes are suitable for your device. Press the power key or the
hard key to test the codes to confirm the code. If the codes
aren’t correct please continue repeat step 4-5 again to search
the proper code for your target device.
7. If they work, it means that you have already found the correct
remote codes. Please press
button to confirm your
decision.