Filter
Top Products
Re:control M207 User’s Manual
34
8. Please press the button to exit after you finish the delete
function.
If you have saved the remote codes in the device or the soft
key, “Delete” function will erase not only the icons but also
the remote codes. You will see a message to confirm your
decision, when the Re:control some codes are saved in your
target.
3.7 Pre-code
The Re:control M207 is equipped with a mass pre-programmed code
database. With the function, you are able to load the code for your
device. It also enables you to control your device even if you lose your
original remote.
1. Please press the button for 1 second to enter Setup Menu. And
then enter “Code Setting” menu.
2. Please choose the “
Pre-code” item and press the button to
enter the submenu.
3. You will see the indication for the function. After reading the tips by
press the
or to read the information pages. After reading
the tips, press
button to exit and enter the next step.
4. Please select the device which you want to load the remote codes.
5. After pressing the soft key, you will see the help guide for the
function. After reading the tips, please press the
button to go to
the next step.