Filter
Top Products
30
Recording Options
CHANNEL SEARCH
To record TV programs, you should search TV channels first.
1. Press SETUP to access the setup menu.
2. Press RIGHT/LEFT to highlight the icon TUNER
and press SELECT to setup it.
3. Press SELECT and UP/DOWN to choose your
desired source: Air or Cable, then press SELECT
to confirm it.
4. Use the RIGHT/LEFT button to highlight SCAN
and press SELECT.
It will search channels automatically.
In the SKIP column, The channel cannot be found
will be marked.
During auto-searching, press STOP to cancel
searching.
5. To browse the found channels, first press RIGHT/LEFT to CH, then press UP/DOWN, and you can also
input numbers and press SELECT.
6. If you want to skip one channel, use UP/DOWN to highlight the skip space of the corresponding channel,
and press SELECT.
7. Press SETUP again to exit.
1. If the picture of the channel scaned is poor, you can use the direction buttons to highlight the channel and
press SELECT, a sub-menu appears.
2. Use RIGHT/LEFT to tune the picture to the best
performance.
3. After tune-up, highlight “Confirm” or “Cancel” on the
bottom, and press SELECT to enter it.
Note:
• Press RETURN to return to the main control bar.
CHANNEL EDIT