Filter
Top Products
8
Rosen A7 Owner’s Manual
Changing Monitor Settings
Display Adjustments: The A7 monitor has adjustable video settings.
To change these settings, press the ENTER button on the overhead
console and hold it for two seconds. A menu with the following
options appears:
COLOR (32)
CONTRAST (32)
BRIGHT (32)
TINT (32)
To select a setting to be changed: Press the DOWN button to move
the cursor down the menu list (it will cycle back to the the top).
To change the value of a setting: Use the LEFT and RIGHT arrow
buttons to decrease and increase the value of the setting. The range
is zero to 63, with 32 as the default.
To exit the menu: Press the ENTER button to save the settings and
exit the menu.
Selecting among various display modes: The A7 has a
“widescreen” display, with a 16:9 aspect ratio (the same aspect ratio
as high-definition televisions).
• To view widescreen DVD’s, press the DISPLAY MODE button
until “Wide” is displayed on the screen.
• To watch “fullscreen” DVD’s or broadcast television (using an
optional TV tuner), press until “Standard” is displayed.
• To stretch the picture to take up more of the screen, select the
“Stretch” mode.
Note: While it is not technically a “monitor” setting, the
internal DVD player can be configured for either a widescreen
16:9 output compatible with the 7” screen, or for a a standard
4:3 output. Using the correct “WIDE” setting will eliminate or
greatly reduce the “black bars” on the top and bottom of the
screen when viewing a widescreen DVD. See page 18 more
more information.
Using the Dome Lights
The A7 has built-in dome lights for interior illumination. In many
vehicles, this feature replaces an original factory dome light, which is
sometimes displaced by installation of the A7 system.
The dome lights are controlled by the Dome Light button on the front
panel of the A7.
ENTER
OPEN
SOURCE
Dome Light
Note: Some vehicles have a dome light dimming feature that
causes the dome light to fade out gradually. The system dome
light may not fade in the exact manner as the factory dome
light, but will still turn on and off normally in conjunction with
the use of the vehicle’s doors. This is proper operation for the
system. If you have any questions, contact your Rosen
authorized dealer.