Rosewill RRC-126 Universal Remote User Manual


 
MCE Remote Control RRC-126 User Manual
3
Features
RRC-126 Remote Control
1. Microsoft
®
Windows
®
MCE certification and Green Button support
2. With all of the buttons and functions necessary for Microsoft
®
certification, including official
Green Button.
3. Small USB dongle style receiver
4. Use standard Microsoft
®
drivers, no software to install.
5. It could wake the system from S1 or S3
6. Infrared Rays Frequency38KHzInfrared Rays transmission distance7~10 meter
IR605/A Receiver
1. Receiver with USB Port, it’s easy to connect with your computer
2. Support one indication LED for the system level interaction
3. Use in-box Windows® drivers
4. RC6 and MCIR keyboard protocols are supported
5. It could wake the system from S1 or S3
6. It consumes around 1.5mA in sleep mode
Package Contents System Requirements
z Media Center Remote Controller (RRC-126) x 1
z Receiver IR605/A (USB Port) x 1
z User’s Manual
z AAA battery x 2
z USB cable x 1 (optional)
z Intel® Pentium® 1GHz CPU or faster
z 512MB RAM or above (1G recommended)
z Desktop or laptop computer running Windows®
Vista Home Premium or Ultimate
z USB Port; PC platform
z Graphics card capable of DirectX9
Installation and Operation
1. Battery Installation -- Open the battery cover of the Remote Control and install 2 AAA batteries
correctly.
2. Receiver Installation -- Plugging IR605/A receiver (with USB Port on it) into the USB port of your
computer.
(Optional) If your package comes with a USB cable, you can use the USB cable to bridge between
your USB port and the IR605/A Receiver and then put the IR605/A Receiver in front of you to get a
better signal transmission.
3. Operation -- Before you start to use it, please make sure the distance between RRC-126 Remote
Control and IR605/A receiver is under an effective range and the Remote Control aim at the IR
receiver. You can use your Remote Control by pressing any key you want.