Filter
Top Products
3
1 – BASIC ORIENTATION
Out Of The Box
Remove the RR-990 and the package of 4 AAA bat-
teries from the packing material.
Turn the RR-990 over and slide the cover off the bat-
tery compartment by putting your thumb on the ar-
rowhead and pushing in the indicated direction.
Place the four AAA batteries inside (follow the polar-
ity drawing on the bottom of the compartment) and
replace the cover. MAKE SURE you install the bat-
teries correctly! Otherwise, you could inadvertently
damage the RR-990.
Your First View
When you turn the RR-990 over again, you’ll see the
component Control Panel displayed on the LCD
screen is actually divided into three areas:
1. A top section containing five always-visible
buttons. Four are small (“Reset,” “Delete,”
“Learn,” and “Macro”) while “Power” is larger.
There are also five hidden indicators (“Delete,”
“Error,” “OK,” “Learn,” and “BatLow”) that
appear only to confirm a requested function or
to alert you to something you will need to
know as you’re using the RR-990.
2. A changeable center section (most of the LCD
screen) with the operating buttons for a par-
ticular component. You can choose to view all
of the available buttons at once (Complete
mode) or only essential ones (Basic mode).
There’s also a Custom mode. You’ll find out
more about these options just a bit further on.
3. An always-visible bottom section with two
rows of selector buttons for different compo-
nents. You can tell what component you’re cur-
rently operating by noting which selector has
an icon displayed to the right of the ID.
DELETE ERROR OK LEARN BATLOW
DELETE
RESET
LEARN MACRO
POWER
VOLUME
10 0
789
456
123
CHANNEL
TV/VIDEOMENU
MUTERECALL
+
–
LD
SEL 2
CD
SEL 1
VCR
TAPE
TUNER
TV
AMP
RR990
Top Section
5 hidden status indicators
and 5 control buttons.
Bottom Section
8 Component Selector buttons. Selecting a
different component causes the Control
Panel display to change accordingly. Note
the icon displayed on TV button, indicating
that this component is activated.
Center Section
Control Panel with functions for each
component. Control Panels change
depending on which component is
selected. And, you can customize the
appearance of each Control Panel.