Filter
Top Products
19
English
NOTE
: Some of the RSDX-02e functions ap-
pear on the front panel and the remote.
Throughout this manual, letters in gray boxes
refers to the labeled illustration of the remote
at the front of this manual; numbers in gray
boxes refer to the front panel illustration.
The remote control includes five hard buttons
POWER, CHANNEL UP/DOWN, and VOL-
UME UP/DOWN. The other remote control
commands are used by touching “virtual”
buttons appearing on the large touch screen
panel on the remote.
Programming the RR-1070
MENU Button
See Figure 2
Before using the the RR-1070, you may need
to program it to operate the RSDX-02e. De-
tailed programming instructions are contained
in the separate remote control owner’s manual.
Or, follow these simple instructions:
1. Touch the MENU command at the bottom
left of the touch-screen on the remote.
2. Touch the SETUP command on the touch
screen.
3. Touch the BRAND NAME command on the
touch screen.
4. Touch the ROTEL command on the screen.
5. Select and touch the RSDX-02 EURO com-
mand on the touch screen and wait a few
seconds.
6. Touch the OK command on the touch screen
and wait afew seconds.
7. Touch the HOME command at the bottom
center of the touch screen.
Using the RR-1070
ROTEL Button
See Figure 2
To use the RR-1070 remote with the RSDX-02e,
press the ROTEL virtual button on the home
page of the remote control. The touch screen
display will change to the first of six pages of
commands for the RSDX-02e. Each page is
identified by the name ROTEL at the top.
If you do not see one of the Rotel touch screen
pages, press the HOME virtual button on any
page to return to the home page where you
can press the ROTEL button.
NOTE
: Some remote buttons have different
functions for depending on the source input.
Select the proper input (i.e. DVD or FM/AM)
before using the command buttons.
Changing Pages
PAGE Buttons
See Figure 2
There are six pages of touch screen commands
for the Rotel RSDX-02e. From any of these
pages, press the up or down PAGE buttons
at the bottom of the touch screen to move
forward or back to the next page. Each page
number is displayed between the two PAGE
buttons, for example: PAGE 1/6 indicating
the first of six available pages.
Throughout this manual, remote control com-
mands that are available on any of these pages
or on the remote’s hard buttons are indicated
with a single letter in a gray box, referring to
the remote illustration (Figure 2) at the front
of this manual. Commands which appear only
on of the six Rotel pages will be indicated with
the page number followed by a letter, for
example:
indicating a command on Page
3. Again these indicators appear on the re-
mote illustration for easy reference.
POWER Button
The POWER hard button on the remote pro-
vides the same function as the STANDBY but-
ton on the front panel. Press the button once
to activate the unit; press again to put the unit
into standby mode.
VOLUME Buttons
Two hard buttons on the remote (VOL + and
VOL –) control the master VOLUME, adjust-
ing the output level of all channels.
CHANNEL Buttons
Two hard buttons on the remote control, la-
beled CH + and CH –, are used when oper-
ating the RSDX-02’s DVD player or AM/FM
Tuner. In DVD mode, these buttons are used
to select the next
Track
, backward or forward.
In AM/FM mode, the buttons tune up or down.
HOME Button
The HOME virtual button appears at the bot-
tom of the touch-screen on every ROTEL or other
device page. Press HOME to return to the main
touch-screen page.
MUTE Button
The MUTE virtual button also appears at the
bottom of the touch-screen on every ROTEL page.
Press the MUTE command to temporarily reduce
the volume level to zero. Press the button again
to restore the volume to the previous setting.
Basic Operations
This section covers the basic operating con-
trols of the RSDX-02e and the remote.
Power On/Off
The RSDX-02e has a STANDBY button on the
front panel and a POWER hard button on the
remote. Press either button to turn the unit on.
The front panel LCD display lights up.
Press either button again to turn the unit off.
When turned off, the RSDX-02e remains in a
low current standby mode. The LED above the
STANDBY button the front panel lights when
the unit is in standby mode.
NOTE
: To completely power off the RSDX-02e
when away from home for a long period of
time, unplug the unit from the AC wall outlet.
The RSDX-02e also has a sleep function which
turns the unit off after a specified amount of
time (see the following topic). There is also an
auto standby function that can automatically
turn the unit off (only when using the DVD
player) 30 or 60 minutes after the disc is
stopped.
SLEEP Timer
P4-F
The RSDX-02e sleep function turns the unit off
automatically after a specified amount of time.
Press the SLEEP command on page 4 of the
remote to activate the sleep function. Each ad-
ditional press of the button increases the length
of time before the unit turns off.
1st press: 10 minutes
2nd press: 20 minutes
3rd press: 30 minutes
4th press: 60 minutes
5th press: 90 minutes
6th press: 120 minutes
7th press: 150 minutes
8th press: 0 minutes (sleep timer cancelled)
A SLEEP indicator and with the amount of time
is shown in the front panel display. The time
remaining before the sleep timer turns the unit
off can be displayed with a single button press.